Change or rekey · Brock
Lock Replacement & Upgrade in Brock
The lever on the side door droops toward the floor and rattles in your hand.
In plain words
A keypad or smart lock is a lock replacement with a few extra steps, and it suits households where keys circulate widely. The locksmith fits the new deadbolt to the existing bore, checks that the bolt throws freely so the motor is never straining against a misaligned strike, sets up user codes and any phone pairing, and shows you the mechanical override and the battery warning. Because these locks still rely on a bolt and a strike, the same attention goes into the frame as for any deadbolt. You gain convenience without giving up the mechanical basics that make a door hard to force.
How the visit goesThe house is fifteen years old and every exterior door still wears the light hardware the builder fitted: a short bolt, a thin strike held by two small screws, and a knob lock that never suited a street entrance.
Lock Replacement & Upgrade
How the visit goes
Function, and the way out
Each door has a job, and the hardware should match it. The main entrance needs a keyed deadbolt with an interior thumb-turn so anyone inside can leave without hunting for a key. A door with glass beside it is better served by a reinforced strike and glass protection than by a keyed cylinder on the inside. Interior doors may want passage, privacy or a keyed function, and a lever suits hands that find a knob awkward. Sorting function out first keeps looks from overriding how the door has to work.
Setting and reinforcing the strike
The strike side is where a replacement earns most of its value. With the door closed, the bolt is thrown and its mark checked against the pocket so the strike can be positioned to accept the full throw without rubbing. A shallow pocket is deepened until the bolt seats to its stop. Then a reinforced strike or a strike box is fitted using 75 millimetre screws that pass through the jamb and bite into the framing behind it, which is what stops a jamb splitting under a kick. Where an old forced entry has cracked the wood, it is glued and dowelled or a repair plate is fitted first.
Every lock tried the way you will use it
Before the tools go back in the van, each lock is operated from both sides with the door open, then closed, then closed hard against the weatherstrip. The latch should catch on its own when the door swings shut, the deadbolt should throw to its stop with a fingertip on the thumb-turn and no shoulder on the door, and the key should turn without lifting or jiggling. You are invited to try each one yourself and to lock up behind the locksmith. Anything that felt marginal has been adjusted, so the door you close that night behaves the same as the one you tested.
Lock Replacement & Upgrade
In the van
Filler plates and thick-door extension kits
Cylinders, plug follower and pinning kit
Handleset with matching deadbolt
Manufacturer-approved cylinder lubricant
Adjustable latch or bolt
Lock Replacement & Upgrade
What affects the quote
Condition of the old hardware
Hardware that comes off cleanly is one thing; painted-over trim, seized or stripped screws and a cylinder that has to be drilled out add time before the new lock can go on.
Patio and French door hardware
Sliding door mortise locks, foot bolts and flush bolts for an inactive French door leaf are specialty items sized to the door, and they are quoted as their own line beside the entrance work.
Special-order hardware
Most standard locks come from the van. A specific style, an unusual finish or a restricted system may need ordering, which affects scheduling and is noted in the quote rather than discovered on the day.
What to have ready
- Are you interested in a keypad or smart lock on any door?
- Which finish should the new hardware match?
- Is the door wood, steel or fibreglass, and roughly how thick is it?
Lock Replacement & Upgrade: questions
QuestionsIs it possible to upgrade just the exterior locks now and handle interior doors later?
Yes, and it is a common way to spread the work out. Exterior doors carry the security load, so starting there with a graded deadbolt and a reinforced strike covers the part that matters most first. Interior locks, passage sets, privacy locks on bathrooms and bedrooms, can be scheduled for a later visit without affecting anything already done, and the locksmith can note what was fitted so the second visit matches it.
What happens to the old lock?
It is yours. Some people keep a sound old cylinder as a spare or move a decent deadbolt to a shed or garage door, and the locksmith can rekey it to the house key for that purpose. Worn or damaged hardware is taken away for recycling if you prefer. Either way, the old keys should be gathered up and discarded so nobody confuses them with the new set.
Can you replace the lock on a sliding patio door or French doors?
Yes. Sliding doors take a replacement mortise hook lock sized to the rail, often with a keyed exterior, and benefit from a secondary foot bolt or a pin through the frames. French doors are secured by treating the inactive leaf properly with flush bolts into the head and sill, then fitting a deadbolt to the active leaf with a strike into that reinforced edge. Both are routine parts of a residential upgrade.
Related services
- Deadbolt InstallationThe front door has a handsome lever and a keyed knob, and that is all.
- Vintage Mortise Lock ServiceThe old skeleton key still fits the keyhole, but it now needs a jiggle, a lean on the door and a little luck before the bolt moves.
- Smart Lock InstallationThe kids get home before you do and the spare key has been lost twice this school year.