Change or rekey · Georgina
Smart Lock Installation
The kids get home before you do and the spare key has been lost twice this school year.
In plain words
Smart lock installation puts an electronic deadbolt or lever on your door that opens with a code, a phone, a fob or a fingerprint, and, on some models, a conventional key too. The locksmith confirms you control the property, measures the door and its holes, and makes sure the bolt travels freely, because a battery motor has less strength than a hand. The hardware is fitted with a solid strike, the maker's specified batteries go in, and the lock is set up under your own account. You leave with codes working and, on a keyed model, the override key tested and the old key retired.
How the visit goesThere are four copies of the front-door key floating around: one with the cleaner, one with a neighbour, one on a hook at your parents' place, and one you honestly cannot account for. You would rather hand out codes you can switch off.
Smart Lock Installation
How the visit goes
Signal strength at the door
If the lock is to be reached from a phone away from home, the network at the door matters as much as the lock. The locksmith checks how strong the Wi-Fi is on the door itself, not in the hallway, because a metal door, a brick wall or a router at the far end of the house can leave the entrance in a dead spot. Where it is weak, the options are a bridge plugged in near the door, a hub-based model that uses its own radio, or a Bluetooth lock that works locally and skips the network entirely. Finding this out before the box is opened avoids a lock that drops offline every evening.
Retrofit locks that keep your outside hardware
Some smart locks mount only on the inside of the door and turn the deadbolt you already own, leaving the exterior face and the keyway as they were. Fitting one begins by checking that the existing deadbolt is on the model's compatibility list and that its tailpiece shape matches an adapter in the box. The interior thumb-turn is removed, the adapter fitted, and the motor unit clamped to the mounting plate so it sits square and turns the bolt through its full travel without slipping. Because the outside is untouched, these suit rented units where the landlord prefers the door unchanged, and older doors whose exterior hardware is worth keeping. The existing key keeps working alongside the phone.
Batteries, warnings and the cold months
A smart lock runs on batteries, and you leave knowing how that side of it behaves. The locksmith shows where the low-battery warning appears on the lock and in the app, how to swap the set, and which type to buy so the motor gets steady power. Cold shortens battery life, so a fresh set before the first hard frost is a sensible habit, and the alert should go to a phone someone actually reads. If the model has an external emergency power contact, you will have seen it used and know where a nine-volt battery lives for the day it is needed.
Smart Lock Installation
In the van
Adjustable-backset bolt and faceplate
Door-position sensor magnet
Mechanical override cylinder and repinning kit
Smart deadbolt or smart lever set
Wi-Fi bridge or home hub
Smart Lock Installation
What affects the quote
Network setup
Joining the lock to Wi-Fi, adding a bridge because the signal at the door is weak, or pairing with an existing hub is setup time and sometimes an extra device, and appears in the quote as such.
Number of users and codes to program
Setting up two codes for a couple is different from configuring a household of six plus a cleaner's schedule and a landlord's master. The count of codes and schedules is a fair part of the labour.
Reinforced strike and security hardware
A box strike with long screws is part of a sound installation and is listed as a part. A wrap-around door reinforcer or a hinge upgrade is offered where the door would benefit, as a separate option.
What to have ready
- Is there already a keypad or app lock on the door, and who set it up?
- How many people need their own way in, and does that list change often?
- Which other doors should share the same key or the same system?
Smart Lock Installation: questions
QuestionsWhat happens when the batteries die?
The lock warns you well before that point, with a light or tone at the keypad and, on connected models, a message to your phone. If the warnings are missed, a keyed model's mechanical override still opens the door, while a key-free model instead has two small contacts on the outside where a nine-volt battery gives it enough power to accept a code. The locksmith shows you each route your model offers and where the spare batteries and the key should live.
Can I install a smart lock myself?
Many people do, and on a door that already closes perfectly with the standard holes the instructions are manageable. Where a locksmith earns their place is everything around the box: recognizing a bolt that drags before it wears out a motor, enlarging or filling holes cleanly, fitting a reinforced strike, rekeying the override so the old key retires, and setting up the account and codes in a way that is easy to manage later. If you have started and hit a snag, that is a normal call too.
What is the difference between a keypad lock, a Bluetooth lock and a Wi-Fi lock?
A keypad lock is operated at the door by code and needs no phone at all. A Bluetooth lock adds phone control when you are within a few metres, which covers most daily use and keeps the lock off the internet. A Wi-Fi lock, either built in or through a small bridge, lets you check and change the lock from anywhere and sends alerts, at the cost of more battery use and a dependence on the home network. Many models combine two of these.
Related services
- Deadbolt InstallationThe front door has a handsome lever and a keyed knob, and that is all.
- Lock Replacement & UpgradeThe lever on the side door droops toward the floor and rattles in your hand.
- Vintage Mortise Lock ServiceThe old skeleton key still fits the keyhole, but it now needs a jiggle, a lean on the door and a little luck before the bolt moves.