Skip to content
SunkistBeach Lock & Key Specialists
Open 24/7(289) 653-1447Open 24/7
Hands holding a lock cylinder and a ring of keys above a worn workbench with another cylinder and loose keys. — Lock Rekeying, Georgina
Person holding the black deadbolt and doorknob of a partly open blue front door. — Deadbolt Installation, Georgina

Change or rekey · Georgina

Lock Rekeying in Georgina

Three months of renovation are finally done.

Call (289) 653-1447

In plain words

What you keep after rekeying is almost everything. The deadbolt, the handle set, the finish that matches your door hardware, the strike plate and the holes in the door all stay exactly where they are, which matters on an older door where new hardware rarely lines up with old mortises. What changes is a handful of brass pins a few millimetres long inside each cylinder, and the key in your pocket. The work is done on site, one cylinder at a time, so the house is never left with an unsecured door, and worn springs or a sticky plug can be dealt with while the cylinder is already apart.

Sound familiar?

The whole key ring went missing somewhere between the grocery store and the bus. You got back in with the spare, but a set of keys is out there, and you would sleep better knowing they open nothing.

How the visit goes

Inside the lock

What a rekey changes

A deadbolt: the round exterior cylinder with its keyway, the latch and the bolt
  1. A deadbolt seen from the outside: the cylinder, the latch and the bolt

    01

    The lock you already have

  2. The same deadbolt with the housing cut away to show the cylinder and its plug

    02

    Inside the cylinder

  3. Cutaway of the cylinder: springs and top pins above the shear line, bottom pins in the plug

    03

    Pins, springs and the shear line

  4. A new key in the cutaway cylinder, with every pin meeting at the shear line

    04

    A new key, new pins

Lock Rekeying

How the visit goes

White door with a black keypad deadbolt and knob, beside a towel holding a lock body, latch, screwdriver and a tool bag. — Georgina
Technician in a cap and clear glasses holding a yellow impact driver at the latch edge of a black door. — Georgina
  1. Smart locks and user-rekeyable cylinders

    Modern hardware gets its own look. Many keypad or app-controlled deadbolts have a conventional override cylinder behind a cover that can be rekeyed to the house key so the backup key is not a stranger on your ring, though some models are key-free and use an external battery backup instead. Some residential cylinders are designed to be reset by the owner with a small tool and a working key; the locksmith checks whether one has been reset correctly and whether it accepts the new key. Where a smart lock is being kept, codes are reviewed at the same time so a departed keyholder's code goes the way of their key.

  2. When a cylinder is swapped instead of repinned

    Sometimes the right move for a particular door is a new cylinder rather than new pins, and the locksmith says so before doing it. A cylinder with a keyway that cannot join the household key is replaced with one that can. A plug that has worn oval, springs that have collapsed, or a cylinder someone has already drilled is replaced because fresh pins would not fix its feel. In each case the replacement is pinned to the same new key as the rest of the house, so the swap is invisible in daily use. The old cylinder is handed to you or taken away as you prefer.

  3. Handing keys out with a little method

    Rekeying gives you a clean start on who holds a key, and a few habits keep it clean. Give a key only to people who need one regularly, and know who they are. If a dog walker, a cleaner or a contractor needs access for a season, a lockbox with a code you can change afterwards is simpler than a key you have to ask for back. Tag spares with a colour or a number rather than the address. When a key does leave your control, a lost ring, a departing tenant, a relationship that has ended, that is the trigger to rekey again, and the next visit is simpler because the doors are already on one system.

Lock Rekeying

In the van

  • Key tags and keying record

  • Pinning tweezers and tray

  • Cylinder shim

  • Graded bottom pin kit

  • Dry graphite or PTFE lubricant

Two technicians in green shirts look over a metal tray holding a chrome tool beside a white van with open rear doors. — Georgina

Lock Rekeying

What affects the quote

  1. Several units in one building

    A landlord rekeying a duplex, a triplex or a small apartment building, with each suite on its own key and a common entry shared, has more cylinders and a keying chart to build, and the quote grows accordingly.

  2. Restricted or high-security cylinders

    Patented keyways use controlled blanks and pins that cost more than standard ones, and their keys are produced from a controlled record instead of being copied, so a system of that kind is quoted differently from builder-grade hardware.

  3. How many cylinders are included

    Each cylinder is removed, pinned and tested on its own, so a single deadbolt and a house with six exterior locks plus a shed and a gate are very different visits, and the quote follows the count.

What to have ready

  • Do any locks feel stiff, loose or need a wiggle to turn?
  • Do you have a working key for every lock, or is there a door with no key at all?
  • How many new keys will your household or your tenants need?
Call (289) 653-1447

Lock Rekeying: questions

Questions
I am a landlord. Should I rekey between tenants?

Many landlords do, and it removes the question of whether every copy came back. The locksmith rekeys the unit's cylinders so the incoming tenant holds the only working keys, cuts the copies you want, and notes the count for your move-in record. Because provincial tenancy rules expect the tenant to be handed replacement keys whenever a landlord changes a lock, the visit ends with keys for both of you and a clear list of which doors were done.

What happens to my old keys?

They become ordinary pieces of brass. Once the cylinders are pinned to the new combination, the old keys turn nothing on your property, so there is no security reason to keep or hide them. Hand them to the locksmith for disposal or drop them in the metal recycling. If a former roommate or contractor still has one, it no longer matters, which is the whole reason for the visit. Keep only the new set, counted and tagged.

Can I keep one door on a different key from the rest?

Yes, and it is common. A basement suite or in-law apartment often gets its own key so the tenant's key opens their door and nothing else, while your key opens the main house. A home office, a storage room or a shed can be kept separate for the same reason. The locksmith sets up the groups you want, pins each accordingly and tags the keys so the separate one is not mixed into the household set.

Related services

Lock Rekeying near you

Call(289) 653-1447

Request a visit

Or call (289) 653-1447 · open 24/7